Can I use any resin with Anycubic photon?

Luckily, the Anycubic Photon is compatible with third party resin manufacturers. Despite the fact that Anycubic’s original resin is quite good, you’ll probably want to test some other brands and resin types. All of Anycubic’s resins are good quality, well-suited to work with the Photon.

Can you use Elegoo resin with Anycubic photon?

They are all compatible with the two presented resins. Whether you choose Elegoo or Anycubic resin is up to you.

Which is better Anycubic or Elegoo?

The build volume differences between these two LCD 3D printers are nearly indiscernible at a glance, but the Elegoo Mars ever-so-slightly beats out the Anycubic Photon with a 120 x 68 x 155mm build volume.

Can you use any resin in any printer?

Can You Mix 3D Printer Resin? Mixing 3D printer resin of the same type is fine, you can mix all types of colors and even brands as long as they are the same type of resin. Some people mix resins of different property types such as flexible or tough resins.

Can I mix resin types?

The general consensus is that mixing different resins of the same type is not a problem, even using different colors and/or brands is fine, but the resin type should be the same.

How many times a resin can be reused?

To avoid performance loss during protein A chromatography cycling, manufacturers often use sodium hydroxide for cleaning as it has the ability to hydrolyze proteinaceous residues and simultaneously sanitize the resin [6-8] yet the maximum number of times a protein A resin can be reused remains variable, ranging from 50

Is resin toxic after curing?

Cured UV resin is non-toxic and even food safe. The liquid toxins are now hard and can no longer penetrate the skin. However, UV light can also decompose hard synthetic resin. The decomposed components are toxic.

Can you use any resin in a 3D printer?

For resin 3D printing, you can choose to use Standard Resin, Clear Resin, Tough Resin, Flexible Resin, Water-Washable Resin, and Dental Resin, each with its own set of unique properties and specific use cases.

Can I use epoxy resin on 3d printer?

Using Epoxy Resin With 3D Printing – YouTube

How much resin do I need for photon?

You should pour about 125ml in. It has to be about a quarter up from the FEP, up to the line where the chamfer starts in the vat. Do not exceed the line, if there is too much resin, it will rise from displacement and cause a spill. Also it can get into the screws and ball joint of your build plate.

Does clear resin need more exposure?

The trick to 3D printing clear resin prints is to minimize the amount of UV light the models are getting. Over exposure to UV light is most commonly what makes clear prints yellow.

What is a good exposure time for 3D printing?

The default is 6 seconds in ChiTuBox. For most resins, this exposure time is enough. And this setting can be modified based on the actual situations. As for bottom exposure time, it’s recommended to make it around 8-12 times longer than your normal layer cure time.

What is retract speed Chitubox?

Retract speed: 150 mm/min.


IPA Alternatives For Resin Print Cleaning | EU Available

HOW TO: Flawless RESIN timelapse with LIGHT-OFF DELAY trick

World’s Fastest Resin 3D Printer | Rocket 1 | 380mm/h Printing Speed

Other Articles

Can you 3D print stretchy material?

What is the most accurate 3D printing technology?

What resin does the LD 002H use?

What can you make with a 3r printer?

Where are Creality 3D printers made?