In 2019, Creality had released a DIY 3d printer CR-10 V2 that you can add the direct-drive yourself. it comes with the normal Bowden extruder, but design a special connector on the extruder near the hot end.
Is Creality ender 3 direct drive?
Ender 3 Direct Drive Extruder for Creality Ender 3 Pro Ender 3 V2 Upgrades with 42-40 Stepper Motor Hotend Kit 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament. Amazon’s Choice highlights highly rated, well-priced products available to ship immediately.
What Ender is direct drive?
| Ender 3 S1 | ||
|---|---|---|
| Extruder: | Direct Drive | Bowden |
| Print bed leveling: | Automatic | Manual |
| Accuracy: | 0,1 mm | 0,1 mm |
| Min. layer thickness: | 0,05 mm | 0,1 mm |
Is Ender 3 v2 direct drive better?
Upgrading to a direct drive extruder will allow you to not only print more easily with flexible materials but also have better overall extrusion. Direct drive means the extruder is mounted on the print head, allowing for “direct” extrusion.
Does Ender 3 V2 have direct drive?
– Creality Ender 3 (V2/Pro) Direct Drive Upgrade. The scope of delivery includes the direct drive extruder itself including the stepper motor and nozzle, the required tools, the cable for the stepper motor and a view of the mainboard connections that are required for the Ender 3.
How hot can ender 3 V2 get?
For those of you with the Ender 3 V2, you’ll want to check out this guide from the same author. Maximum temperature? Equipped with its thermistor, this all-metal hot end can reach 285 °C. Once again, if you want to reach this temperature, you will need to upgrade the firmware as well as the brass nozzle.
How do I convert Ender 3 to direct drive?
What does a direct drive extruder do?
The direct drive extruder (A) is installed with the hotend (C) and pushes the filament (B) directly into the nozzle (D). All filament processing components are therefore located in one place on the print head. This creates advantages and disadvantages that you should consider before buying a printer.
Videos
Other Articles
Does Cura slicer work with Ender 3?
How do you print on a MakerBot Replicator 5th generation?
How strong is 3D printed aluminum?
Can a Raspberry Pi run a 3D printer?
Can I 3D print something flexible?
